 | Home > Metal Stampings > Blank Square Rectangle Plain Flat Metal Plates > Stamping RDP7x2 Blank Plain Rectangle Flat Plate 7" length x2 1/4" width |
Stamping RDP7x2 Blank Plain Rectangle Flat Plate 7" length x2 1/4" width
Approx. size 7" length x 2 1/4" width (Retangle-almost) Plain Flat Plate. 18 gauge which is .0478" Metal Thickness (approx. thickness of a dime). 1/16" is (.0625") thickness so this rectangle plate is slightly thinner than 1/16". Metal Steel Plates. Cold Rolled Blank. A magnet will adhere to this steel.
While the length remains constant, the width varies on each end as well as from piece to piece, thus not a true rectangle but closest description for people to understand. Width can vary from 2" to 3".
After production several hundred pieces at a time are put into a mixer and tumbled for several hours. The tumbling process deburrs (smooths out) the edges and gives the metal a distressed look.
While the length remains constant, the width varies on each end as well as from piece to piece, thus not a true rectangle but closest description for people to understand. Width can vary from 2" to 3".
After production several hundred pieces at a time are put into a mixer and tumbled for several hours. The tumbling process deburrs (smooths out) the edges and gives the metal a distressed look.
Price each:$1.00
Item# RDP7x2
| BUY quantity and receive FREE | STAMPING(S)* |
| 25-49 | 1 more FREE |
| 50-99 | 3 more FREE |
| 100+ | 10 more FREE |
| * Per Individual Metal Stamping (applies to steel stampings .020" thickness only) Minimum 25 pieces PER ITEM to qualify | |
