Metalcraft Scroll Bender MK3/4 with Tube Bending Components

LOOK AT THE SIZES THIS SCROLL BENDER WILL DO!

Combining ease of operation with the versatility the MK3/4 Scroll Bender offers, makes this a popular scroll bender.

The versatility of the MK 3/4 Scroll Bender stems from its ability to produce a range of different scroll shapes and sizes. This is achieved by using different combinations of the 4 scroll segments that come with the MK3/4. This is a popular feature.


Pictured are some of the scrolls
that can be made using the MK3/4 Scroll Bender.


EASY TO USE - NO PRE-HEATING OF METAL REQUIRED WHEN SCROLLING (except with largest size 5/8" solid round rod or solid square bar).

FREE Downloadable MK3/4 Scroll Outline Sheet showing scroll made using 1"w x 3/16" thickness flat metal strip. CLICK HERE for .pdf file

FREE Downloadable MK3/4 Scroll Outline Sheet showing scroll made using 1/2" solid square bar. CLICK HERE for .pdf file

___________________________________________________________________________
SPECIFICATIONS:
Maximum Working Capacity:
2" wide x 1/4" thickness OR
1" wide x 3/8" thickness (flat strip metal).

1/2" (unheated) or 5/8" (with end heated) (solid round rod)

1/2" (unheated) or 5/8" (with end heated) (solid square bar)

Max. Scroll Size:
10" (approximate due to the varying temper (spring) of steel)

Min. Scroll Size:
For 2"wide x 1/4" thickness flat strip metal (using #1 scroll segment only) is approx. 2 3/8"

For 1"wide x 3/8" thickness flat strip metal (using #1 scroll segment only) is approx. 3 1/8"

For 1/2" or 5/8" solid square bar or solid round rod (#1 and #2 scroll segments must be used together for these sizes) is approx. 4 3/4"

Max. Tube Dimensions:
3/4" O/D. Round Tubing
1/16" Recommended wall thickness.

Dia. of small tube bender segment (inner diameter of formed tube) 3".

Dia. of large tube bender segment (inner diameter of formed tube) 5 1/16".

Tool Dimensions:
14 1/4" (width) x 14 1/4" (depth) x 7" (height)
18" each handle length OR
34" each handle length with extensions on.

Boxed weight: 55 lbs.

Other Features:
Interchangeable segments to enable you to make various scroll profiles.
Rapid locking system for holding and releasing bar ends.
Easy scroll release allows for rapid removal of formed scrolls. Handle extensions for added leverage when working larger material.
Allows forged fish tail ends to be scrolled.

All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
___________________________________________________________________________

VIDEOS: