| Maximum working Capacity Shearing: 1" wide x 3/16" thickness (flat metal strip) 1/4" (solid square bar) 1/4" (solid round rod) Punching: 1/8" diameter hole in up to 1/8" thick material. 3/16" diameter hole in up to 3/16" thick material. 1/4" diameter hole in up to 1/8" thick material. 3/16" punch block & pin fitted as standard on Master Punch/Shear Tool. Machine dimensions 2 3/8" wide x 11 1/4" deep x 6 1/8" high x 17 3/4" (handle length). Boxed Weight: 18 lbs. Box dimensions 24" long x 7" wide x 6" high Other features
All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool. Maximum working Capacity Rolling: 1" wide x 1/4" thickness OR 1 3/16" wide x 3/16" thickness (flat metal strip) 3/8" (solid round rod) 3/8" (solid square bar) Bending: 1" wide x 3/16" thickness (flat metal strip) 3/8" (solid round rod) 3/8" (solid square bar) Angle of bend achievable 180 degrees to 60 degrees Riveting: 3/16" diameter rivet Micro Bending using "U" Formed Die: 3/4" wide x 1/8" thickness (flat metal strip) 9/16" wide x 1/8" thickness - reverse bend only - (flat metal strip) 1/4" Solid Round Rod/Square Bar using the larger of the 2 "U" dies provided in kit. 3/16" Solid Round Rod/Square Bar using the smaller of the 2 "U" dies provided in kit. Micro Bending using "V" Formed Die: 3/4" wide x 1/8" thickness (flat metal strip) 9/16" wide x 1/8" thickness - reverse bend only** - (flat metal strip) 1/4" Solid Round Rod/Square Bar using the larger of the 2 "V" dies provided in kit. 3/16" Solid Round Rod/Square Bar using the smaller of the 2 "V" dies provided in kit. FREE Downloadable Micro Bending Kit How To. CLICK HERE for .pdf fileMachine dimensions 6 1/2" wide x 11 3/8" deep x 4 1/2" high x 17 1/4" (handle length). Boxed Weight: 28 lbs. Box dimensions 24" long x 7" wide x 6" high. Other features End Stop Screw fitted for producing consistent bends and circles/arcs when rolling. ** A reverse bend is: When bending on the Micro Bender making a square or a pentagon shape is what we call a closed bend as the shape is being closed and the steel ends will eventually touch. A reverse or “s” bend is where the second bend is bringing the steel away from the original bend i.e. like a zig zag effect. Reason you can only use a lighter gauge material on a reverse bend is because when reverse bending the steel needs to sit on the recessed part of the die ( if the reverse bend is tight ) which is only half the width and so the bent steel does not have the full support of the die. All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool. Maximum working Capacity 1" x 3/16" (flat metal strip) 3/8" (solid round rod) 3/8" (solid square bar) Max. scroll Size 8 1/4" (approximate due to the varying temper (spring) of steel) Tool dimensions 14 1/4" wide x 12 1/2" deep x 6 1/4" high x 18 1/8" (handle radius). Boxed Weight: 33 lbs. Box dimensions 16" long x 16" wide x 8" high. Max. tube Dimensions 3/4" O/D. Round Tubing Recommended wall thickness 1/16". (the above tubing information is for guidance only and based upon the use of ERW Mild Steel Tube to the dimensions shown). Dia. of small tube bender segment (inner diameter of formed tube) 3". Dia. of large tube bender segment (inner diameter of formed tube) 5 1/16". Other features Interchangeable segments to produce a whole range of scroll sizes and shapes. Can also work material with fish tail ends. All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool. Maximum working Capacity 3/4" x 1/8" (flat metal strip) 1/8" (solid round rod) Max. scroll Size 4 3/8" (for flat metal strip) - the maximum scroll size quoted is approximate due to the varying temper (spring) of steel. Tool dimensions 6"w x 9"d x 4 3/4"h x 8 1/4" (handle radius). Boxed Weight: 8 lbs. Max. tube Dimensions 3/8" O.D. Recommended wall thickness 1/32". Dia. of tube former segment (inner diameter of formed tube) 1 15/16" All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool. |