Metalcraft Tool Set Practical v2

Metalcraft Tool Set Practical v2
2 Differences between Practical V1 and V2:
  • V2 contains the Practical Twister
  • V2 contains the MK2/3 Scroll Bender with Tubing Components in place of the MK2/2H Scroll Bender in V1


  • Click Here for Metalcraft PRACTICAL TOOL SET Comparison Chart (Free and Printable .pdf format)

    LoginLoginCreate Account

    To place an order or to view pricing
    information, please login or create an account.

    Included Contents
    Click on a link below to see information about the included products.
    Item# PPSwMD
    Metalcraft Practical Punch / Shear Tool with Measuring Device
    Dual function metal working tool. This hand operated machine allows one to cut hot rolled mild metals to length and punch round holes in flat metal strip.
    Maximum working Capacity
    Shearing:
    3/4" wide x 1/8" thickness (flat metal strip)
    3/16" (solid square bar)
    3/16" (solid round rod)

    Punching:
    1/8" diameter round hole in up to 1/8" thick material
    Other features
    Adjustable punch platform.
    4 available cutting edges on lower shear blade.



    Machine dimensions
    2"w x 6 7/8"d x 5 1/8"h x 13 3/8" (handle length). Boxed Weight: 8 lbs
    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# PRBRT
    Metalcraft Practical Rolling / Bending / Riveting Tool
    Maximum working Capacity
    Rolling:
    3/4" wide x 1/8" thickness (flat metal strip)
    3/16" (solid round rod)
    5/32" (solid square bar)

    Bending:
    3/4" wide x 1/8" thickness (flat metal strip)
    3/16" (solid round rod)
    5/32" (solid square bar)

    Riveting:
    1/8" diameter rivet
    Angle of bend achievable 180 degrees to 90 degrees.
    Minimum space between 90 degree bends is 9/16" when using 1/8" solid round rod.
    Machine dimensions
    6 1/2"w x 6"d x 2 3/8"h x 11 7/8" (handle length). Boxed Weight: 8 lbs.
    Other features
    End Stop Screw & Nut fitted for producing consistent bends and circles/arcs when rolling.

    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# PTWA
    Metalcraft Practical Twister w/ Adaptor
    Maximum working Capacity
    3/4" wide x 1/8" thickness (flat metal strip)
    3/8" (solid square bar)
    Length of twist Possible
    Min. 3 1/8" Max. 38 1/2" - longer twists can be achieved by moving twisted section through the machine and then twisting the next section.
    (Practical Twister Adaptor maximum working capacity: 3/4" x 1/8" (flat strip only). Length of Twist possible: Min. 1" Max. 37")
    Machine dimensions
    4"w x 42 1/8"L x 3 1/2"h x 11" (handle length).
    Boxed Weight: 10 lbs.
    EASY TO USE - NO PRE-HEATING OF METAL REQUIRED TO TWIST.
    The Practical Twister w/ Adaptor is shipped in 1 box: approx. 10 lbs.
    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# 23SBWTC
    Metalcraft Scroll Bender with Tube Bending Components MK2/3
    Maximum working Capacity
    3/4" x 1/8" (flat metal strip)
    1/8" (solid round rod)
    Max. scroll Size
    4 3/8" (for flat metal strip) - the maximum scroll size quoted is approximate due to the varying temper (spring) of steel.
    Tool dimensions
    6"w x 9"d x 4 3/4"h x 8 1/4" (handle radius). Boxed Weight: 8 lbs.
    Max. tube Dimensions
    3/8" O.D.
    Recommended wall thickness 1/32".
    Dia. of tube former segment (inner diameter of formed tube) 1 15/16"
    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# 12SBR
    Metalcraft Scroll Bender MK1/2
    Maximum working Capacity
    1/2" x 3/32" (flat metal strip)
    1/8" (solid round rod)
    Max. scroll Size
    3" - the maximum scroll size quoted is approximate due to the varying temper (spring) of steel.
    Tool dimensions
    3 13/16"w x 3 13/16"L x 1 3/4"h.
    Boxed Weight: 2 lbs.
    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# MDVD
    Metalcraft Tools 2 dvd Set
    Item# MDIB
    Metalcraft Designs & Ideas Book
    Item# 38116FS
    Flat Strip Metal 3/8"wide x 1/16" thickness x 36" Long, - 30 strips per tube (annealed metal)
    Item# 12332FS
    Flat Strip Metal 1/2" wide x 3/32" thickness x 36" long - 18 strips per tube (annealed metal)
    Item# ANUTSB
    Assorted Nuts and Bolts (150 count) 1/8" dia. x 3 different lengths
    SAVE OVER $194.00 when you buy this tool set vs. buying the items listed individually.
    Metalcraft Single Tools Metalcraft Tool Sets Metal Stampings Metal Fasteners