The Master RBR Tool will ship separately from Tool Set - approx. Nov 6, 2017.

Metalcraft Tool Set Master v2
The Master Workshop is an excellent shop for advanced DIY metal working craftspeople. Individuals in metals programs or businesses associated with heavier gauge metal work also find the Master Workshop the right choice.
7 metal working functions: rolling, bending, punching, shearing, twisting, scrolling, and riveting - are performed without any heat or welding being required.

Difference between Master V1 and V2 is:
  • V2 comes with the Master Twister with Basket Making Attachment.

    Click Here for Metalcraft MASTER TOOL SET Comparison Chart (Free and Printable .pdf format)

  • LoginLoginCreate Account

    To place an order or to view pricing
    information, please login or create an account.

    Included Contents
    Click on a link below to see information about the included products.
    Item# MPST
    Metalcraft Master Punch / Shear Tool with Measuring Device
    Maximum working Capacity
    Shearing:
    1" wide x 3/16" thickness (flat metal strip)
    1/4" (solid square bar)
    1/4" (solid round rod)
    Punching:
    1/8" diameter hole in up to 1/8" thick material.
    3/16" diameter hole in up to 3/16" thick material.
    1/4" diameter hole in up to 1/8" thick material.
    3/16" punch block & pin fitted as standard on Master Punch/Shear Tool.

    Machine dimensions
    2 3/8"w x 11 1/4"d x 6 1/8"h x 17 3/4" (handle length). Boxed Weight: 17 lbs.
    Other features
    • Adjustable punch platform.
    • Double Acting push/pull lever. Please note the Master PS handle can be reversed to cut and punch in opposite directions.
    • 2 available cutting edges on lower shear blade.
    • Measuring bar attachment included. This feature enables you to set repeatable cutting lengths or hole punch positions (from end of bars or from other holes).

    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# MRBRwMBK
    Metalcraft Master Rolling / Bending / Riveting Tool with Micro Bending Kit
    Maximum working Capacity
    Rolling:
    1" wide x 1/4" thickness OR
    1 3/16" wide x 3/16" thickness (flat metal strip)
    3/8" (solid round rod)
    3/8" (solid square bar)

    Bending:
    1" wide x 3/16" thickness (flat metal strip)
    3/8" (solid round rod)
    3/8" (solid square bar)
    Angle of bend achievable 180 degrees to 60 degrees

    Riveting:
    3/16" diameter rivet


    Micro Bending using "U" Formed Die:
    3/4" wide x 1/8" thickness (flat metal strip)
    9/16" wide x 1/8" thickness - reverse bend only - (flat metal strip)
    1/4" Solid Round Rod/Square Bar using the larger of the 2 "U" dies provided in kit.
    3/16" Solid Round Rod/Square Bar using the smaller of the 2 "U" dies provided in kit.


    Micro Bending using "V" Formed Die:
    3/4" wide x 1/8" thickness (flat metal strip)
    9/16" wide x 1/8" thickness - reverse bend only** - (flat metal strip)
    1/4" Solid Round Rod/Square Bar using the larger of the 2 "V" dies provided in kit.
    3/16" Solid Round Rod/Square Bar using the smaller of the 2 "V" dies provided in kit.


    FREE Downloadable Micro Bending Kit How To. CLICK HERE for .pdf file



    Machine dimensions
    6 1/2"w x 11 3/8"d x 4 1/2"h x 17 1/4" (handle length). Boxed Weight: 26 lbs.
    Other features
    End Stop Screw fitted for producing consistent bends and circles/arcs when rolling.
    ** A reverse bend is: When bending on the Micro Bender making a square or a pentagon shape is what we call a closed bend as the shape is being closed and the steel ends will eventually touch. A reverse or s bend is where the second bend is bringing the steel away from the original bend i.e. like a zig zag effect. Reason you can only use a lighter gauge material on a reverse bend is because when reverse bending the steel needs to sit on the recessed part of the die ( if the reverse bend is tight ) which is only half the width and so the bent steel does not have the full support of the die.
    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# MTWBMA
    Metalcraft Master Twister with Basket Making Attachment
    Maximum working Capacity
    1" wide x 3/8" thickness (flat metal strip) 5/8" (solid square bar)
    Length of twist possible
    Min. 1 3/4" Max. 38 1/2" - (longer twists can be achieved by moving twisted section through the machine and then twisting the next section).
    Basket Making Attachment is included:
    • With the use of special gripping attachments (known as the Basket Making Attachment) supplied with this Master Twister, ornamental 'baskets' can be easily formed using pre-welded clusters of four 1/4" or 5/16" solid square bars.

    • The Basket Making Attachment also allows you to put a "general twist" in square tubing.
      With Basket Making Attachment in place, the length of tubing that can be twisted is approx. 34 1/8".

    • The Basket Making Attachment also allows you to twist 1/4" solid round rod into a rope design.

    Machine dimensions
    5 1/2"w x 42 7/8"L x 5 1/2"h x 23 1/2" (handle length). Boxed Weight: 42 lbs.

    EASY TO USE - NO PRE-HEATING OF METAL REQUIRED TO TWIST.

    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# 33SBWTBC
    Metalcraft Scroll Bender with Tube Bending Components MK3/3
    Maximum working Capacity
    1" x 3/16" (flat metal strip)
    3/8" (solid round rod)
    3/8" (solid square bar)
    Max. scroll Size
    8 1/4" (approximate due to the varying temper
    (spring) of steel)
    Tool dimensions
    14 1/4"w x 12 1/2"d x 6 1/4"h x 18 1/8" (handle radius).
    Boxed Weight:28 lbs.
    Max. tube Dimensions
    3/4" O/D. Round Tubing
    Recommended wall thickness 1/16".
    (the above tubing information is for guidance only and based upon the use of ERW Mild Steel Tube to the dimensions shown).
    Dia. of small tube bender segment (inner
    diameter of formed tube) 3".
    Dia. of large tube bender segment (inner
    diameter of formed tube) 5 1/16".
    Other features
    Interchangeable segments to produce a whole
    range of scroll sizes and shapes. Can also work
    material with fish tail ends.
    All tools are supplied with operating instructions. Please note that the maximum working
    capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits
    or with material of greater hardness may reduce the operational life of the tool.
    Item# 23SBWTC
    Metalcraft Scroll Bender with Tube Bending Components MK2/3
    Maximum working Capacity
    3/4" x 1/8" (flat metal strip)
    1/8" (solid round rod)
    Max. scroll Size
    4 3/8" (for flat metal strip) - the maximum scroll size quoted is approximate due to the varying temper (spring) of steel.
    Tool dimensions
    6"w x 9"d x 4 3/4"h x 8 1/4" (handle radius). Boxed Weight: 8 lbs.
    Max. tube Dimensions
    3/8" O.D.
    Recommended wall thickness 1/32".
    Dia. of tube former segment (inner diameter of formed tube) 1 15/16"
    All tools are supplied with operating instructions. Please note that the maximum working capacity stated is for Hot Rolled Material or Annealed metal. Working beyond these limits or with material of greater hardness may reduce the operational life of the tool.
    Item# MDVD
    Metalcraft Tools 2 dvd Set
    Item# MDIB
    Metalcraft Designs & Ideas Book
    Item# ANUTSB
    Assorted Nuts and Bolts (150 count) 1/8" dia. x 3 different lengths
    SAVE OVER $199.00 when you buy this tool set vs. buying the items listed individually.
    Metalcraft Single Tools Metalcraft Tool Sets Metal Stampings Metal Fasteners